The New DryerJack Series hoods are roof vent terminations specifically designed for dryer venting. Its precision tuned design creates no resistance giving a level of performance previously unavailable in the industry. Featuring an industry first curved damper, this sturdy 26 gauge Galvalume® steel extra clearance style vent is best suited for medium snowfall regions, sloped roofs with flat profile cement tiles other composite shingles. Does not provide adequate clearance in height for "S" or Barrel Tile roofs.
Virtually Impenetrable to Birds and Rodents
Industry-first curved damper profile
Radius corners to minimize injury
Creates no back pressure
Complies With IMC 504.4 & IRC 1502.3
Will meet the 2017 ICC code requiring that the passageway not diminish in size
4" round collar installed in and silicone sealed in bottom plate
Carton is 14x14x12 and 4.5 pounds
This medium sized Galvalume® roof cap has a plate (flange) size of 12” wide x 14” and the structure is 6” wide x 8” and about 9” high. It has a 4.12 inch diameter collar that excepts typical residential dryer exhaust conduit. Per building codes, there is no screen in this vent as it is exclusively designed for clothes dryers. Unlike other roof vents this vent features a unique light-weight damper that is curved which increases the efficiency dramatically. The final opening is 65% larger than the round pipe portion. By far, this is the most efficient roof vent on the market.
For flat roof installs, we recommend a installing our DJK486U (curb style) over a raised curb. Search the part number above.
The collar penetrates the plate about 1.25 inches and is sealed to the plate with a silicone bead. It will work on sloped roofs from 2/12 up to 12/12. Note: Not recommended for use with a high-profile roof tiles like "S", Spanish S as there is only 5 inches between the opening and the bottom plate. Bird nest building within would be doubtful due to the slope and shape of the damper. This vent is proudly made in the USA.
Galvalume: A patented alloy of barrier-resistant aluminum and corrosion-fighting zinc gives Galvalume its superior corrosion resistance. Most Galvalume substrates feature an alloy that is 55% aluminum, 43.5% zinc and 1.5% silicon. Tests have proven this alloy superior to the zinc-only coating used in regular Galvanized sheeting. Additionally it is Acrylic Coated, coating designation AZ-55.
Complies with 2017 code M1502.3.1 (Exhaust termination passageway size).
Professional installation is recommended.
DIY'ers, we recommend Polyurethane Roof and Flashing Sealant
Not recommended for for bathroom exhaust fans with less than 70 cfm output.