DryerWallVent - Tan
4", with Collar
Your home deserves a better wall vent. Select the new DryerWallVent for longevity, performance and aesthetics. This low-profile vent is specifically designed for efficiently venting a dryer, though it can work for other applications like bath vents as well.
Longevity: Typical wall vents come in cheap plastic or lightweight metal that will not weather well, are easily crushed or mangled, and can become real eyesores. Your home is built to last a lifetime and so should your home’s components. Choose the DryerWallVent for the long haul. Its housing is made of heavy-gauge, deep-drawn galvanized steel. The lighter weight damper is composed of Galvalume® steel with a stainless-steel hinge pin. For extra protection, each DryerWallVent is powder-coated with weather-resistant PPG Envirocron®.
Aesthetics: The DryerWallVent’s low profile and clean lines, combined with four stock powder coating color choices (white, tan, brown, and black), help it blend into the home’s exterior, though it can also be used as an architectural accent. Deep draw manufacturing makes for a sleek housing that doesn’t compete with exterior aesthetics. When you replace unsightly vents with the DryerWallVent, you’ll improve curb appeal and allow your beautiful home to shine.
Installation: Combine all these benefits, longevity, performance and aesthetics, with ease of installation and you’ve got a great new project that you can quickly complete. Standard installation is straightforward and can be finished in 5 simple steps. The optional backing plate install for wider wall openings requires only three additional steps.
Summary of Benefits:
- Allows the dryer to operate at peak efficiency
- Can help reduce drying times, wear and tear
- A large, accessible opening makes cleaning and maintenance a breeze
- Installs easily in lap siding, stucco, brick and other conventional sidings
- Blends into exteriors with clean lines and low profile
- Meets or exceeds manufacturer and code requirements
- Provides extra protection from weather and pests
- Stands the test of time with heavy gauge steel and powder coating
Ratings & Reviews
dryer wall vent
by inflorida| 12/8/2016 12:00:00 am
This is the best vent I have ever come across. I was in the residitual contracting business for over 20 years and remodeled several hundred homes and commercial properties. Wish this product had been part of my product line. You will be very happy with this item if you purchase best I,ve ever come across. I is wirth every penny.
Dryer wall vent
by gda| 10/15/2016 12:00:00 am
Excellent product. Blends in well with siding and functions perfectly. Easy to install for a very neat apearance. Shipped fast and packed well.
by Joan| 10/1/2016 12:00:00 am
I am very pleased with the flush mount dryer vent as it is hardly noticable. We had to place it on the patio so aesthetics were important to us. It doesn't look cheap and operates quietly. Happy to write this review.
by Jon| 9/26/2016 12:00:00 am
I chose this product because we our building our first house in Florida. The heavy quality construction of this product did not disappoint. No flopping in the wind.
Better than expected
by Jerry| 6/13/2016 12:00:00 am
Received the flush mount metal dryer vent in a timely manner. Pleasantly surprised with the quality. Heavier gauge metal than expected and beautiful finish and color(Tan). Another benefit is that the vent slides into the exhaust tubing rather than over the tubing. Much easier to install. Would recommend this item most highly.
by Homeowner| 11/27/2016 12:00:00 am
After having to reroute the dryer vent from the roof to right beside the front door I needed something that looked nice and functioned great. The vent has been installed for over a month and I absolutely love it! A very easy install and nice sleek look. Would recommend to anyone.
Dryer Wall Vent
by Jason| 1/1/2017 12:00:00 am
This is an excellent vent cover. Easy to install and feels quite durable. The door closes when dryer is off and it's impossible to open with your hands (and hopefully impossible for all the curious critters in the yard). Door opens with no trouble when dryer is on. Seems built to last. Highly recommended.
Dryer Wall Vent
by Burton| 4/30/2015 12:00:00 am
My dryer vent is of 4" diam. sheet metal piping, and the wall vent would not go into it. So, I cut 3 places in it with a sheet metal cutter at approx. 120 degree spacing; I then installed a 4" screwdriver-adjustable pipe clamp on it and gradually tightened this clamp. It did not deform the vent cover but bent it slightly evenly all around. I then installed it without any problem. It is an excellent product & I recommend it as the best one to install.
by John| 10/9/2016 12:00:00 am
It's a great dryer vent and I'd certainly use it again. Much better than the plastic/vinyl models sold in many home building stores. I used it to replace an existing vent that was constantly sticking open. This vent appears to have solved that problem - and it's durable and looks great.
by Homeowner| 4/18/2015 12:00:00 am
We were tired of knocking off our old dryer vent by the back door. This product is perfect and the quality and craftsmanship is simply fantastic.
Bravo, Bravo! A metal vent that fits existing piping with no screws even!
by Patrick| 9/17/2016 12:00:00 am
After checking the 3 big box stores and the web for a replacement dryer vent I FINALLY found this one. It really did fit snuggly in my existing 4" vent. Like the video showed, just put caulk behind and on the sides of the vent (no screws even). Looks great. Snug fit. Thank you!
Better than ever
by Scott| 4/22/2015 12:00:00 am
This dryer vent was purchased to replace a vinyl vent that had sun rotted. It was easy to install, allowed me to air seal around the vent pipe and is flush with the outside wall; most importantly no more hassle with boxy outside vents that crack after a couple of years. Love the product!
Another great product
by Ron| 2/5/2019 12:00:00 am
While replacing my dryer ducting, it was also time to replace my old brittle plastic vent. This vent is solid metal so it should last for many years. The zero back pressure was a good selling point because I wanted to make my dryer run efficiently as possible. Therefore, I also installed the 90 degree long elbow while redoing my dryer vent metal ducts/pipes. I like the low profile and flush look on this vent compared to many metal vents that protrude several inches from the wall. The product is expensive but it is a quality product. Wish it was more locally available through the home improvement big box stores.
Dryer Wall Vent
by Matthew Cohen| 1/11/2017 12:00:00 am
Excellent Product - much better than plastic.
by Kathy| 12/2/2016 12:00:00 am
I was concerned about being able to install this on concrete block, but it was fairly easy using an outdoor adhesive. It is a 1000% improvement from the 1960's wall vent that was removed.
by Chris Leaver| 11/21/2016 12:00:00 am
I am sick of plastic dryer vents cracking and discoloring in the MI seasons. They don't last. I had one on the house I needed to replace as well as add a bath fan exhaust. I was actually looking for something else when I stumbled across Dryer Vent's website. Glad I did. I now have two premium vents that are low profile. I like this as they are right beside my deck and people would notice our old one that was broken and clogged with dryer lint. Ugh! Not any more thanks to Dryer Vent! I spray painted mine with grey primer and will go over them in the spring to color match the house once we have it power washed. I have zero complaints about the product and look forward to many years of trouble-free usage.
by William| 3/12/2017 12:00:00 am
Dryer Wall Vent works as advertised, but be aware that it fits inside the outlet pipe. I wish there were an option for one that slides outside the vent pipe (like every other part of the system) so it would reduce back pressure, and not trap lint. I modified the vent to accomplish this, but it was a pain to do so.
Flush-Mount Metal Dryer Wall Vent
by Tim| 4/22/2015 12:00:00 am
Well built product which we expect to eliminate our yearly bird nest building problem. My install was on a ladder at 20' and required expansion of my vinyl siding, new J-channel trim, and modifications to the main duct, which my builder had practically collapsed, so about 2.5 hours longer than the 10 minutes shown on the install video, but those were my issues, not the product.
Flush-mount Metal Dryer Wall Vent
by Ed| 4/18/2017 12:00:00 am
I needed to replace my louver external dryer vent and after much research this replacement was exactly what was needed. Installation was simple and the device was easy to seal unto my siding. Less dust in the house since the vent has been in operation
Flush Mount dryer wall vent
by Holly| 7/16/2016 12:00:00 am
Simple to install, fit perfectly and works just as advertised. Love it!
Flush Dryer Vent
by Scott| 2/19/2017 12:00:00 am
This is the best design for a dryer vent. I have a long run and the vents I have used have always clogged with lint and limited airflow. Im very happy with my purchase. Lots of junk on the market, but this is a quality vent. You will not be disappointed in this.
Fast & Easy
by Chris W| 7/27/2016 12:00:00 am
I received the vent an plinth block 3 days after I ordered it. High quality material It took me about a hour to install it and I'm not to handy. Will recommend to friends .
by Walt| 9/18/2016 12:00:00 am
The product is as advertised; it is well made and performs very well. It appears to offer very little resistance to air flow but seals tightly when not in use. It closes tightly in a way that will prevent cold air or "critters" from entering. The install went as described and took only a few minutes. I have used several dryer vent devices but this is clearly the best and will require the least (no) maintenance.
by Steve| 5/15/2015 12:00:00 am
A simple and elegant solution to installing a dryer vent. Well built and worth the price. Easy installation...love it.
Easy to Install
by Karen| 8/23/2016 12:00:00 am
We are installing new siding on our home so ordered these vents to replace the old dryer and bathroom vents. Since they are so easy to install, we decided to temporarily slide in the new vents to test them out before the new siding goes up. Bathroom vent fit with no problems. We had to cut off the edge of the existing dryer pipe because it had a lip on it that folded in making the opening too small. Both vents worked great. Bath fan is a 50 cfm model with a 5 ft straight run, no elbows and the vent blows open OK with no modifications. Great product! Our remodeling company was impressed with the quality of the vents. We're looking forward to getting them permanently installed.