DryerWallVent - White
4", with Collar
Details
The DryerWallVent is built tough in the USA. This sleek, low profile, premium performance vent provides maximum airflow and minimizes lint buildup. The deep drawn heavy-gauge Galvalume® steel housing with a lighter weight Galvalume steel angled damper are powder coated and corrosion-resistant to maintain their shine. The damper's integrated magnets keep it closed when the dryer is not in use, preventing birds and rodents from entering the dryer exhaust system. The wider opening allows the dryer to perform at peak efficiency and provides easy access for vent cleaning and maintenance. The built-in drip edge protects against the elements. The DryerWallVent is available in Black, White, Brown and Tan powder coated colors, as well as a Primed Finish for you to custom paint in any color to match your exterior.
Your home deserves a better wall vent. Select the new DryerWallVent for longevity, performance and aesthetics. This low-profile vent is specifically designed for efficiently venting a dryer, though it can work for other applications like bath vents as well.
Longevity: Typical wall vents come in cheap plastic or lightweight metal that will not weather well, are easily crushed or mangled, and can become real eyesores. Your home is built to last a lifetime and so should your home’s components. Choose DryerWallVent for the long haul. Its housing is made of heavy-gauge, deep-drawn galvanized steel. The lighter weight damper is composed of Galvalume® steel with a stainless-steel hinge pin. For extra protection, each DryerWallVent is powder-coated with weather-resistant PPG Envirocron®.
Aesthetics: The DryerWallVent’s low profile and clean lines, combined with four stock powder coating color choices (white, tan, brown, and black), help it blend into the home’s exterior, though it can also be used as an architectural accent. Deep draw manufacturing makes for a sleek housing that doesn’t compete with exterior aesthetics. When you replace unsightly vents with the DryerWallVent, you’ll improve curb appeal and allow your beautiful home to shine.
Installation: Combine all these benefits, longevity, performance and aesthetics, with ease of installation and you’ve got a great new project that you can quickly complete. Standard installation is straightforward and can be finished in 5 simple steps. The optional backing plate install for wider wall openings requires only three additional steps.
Summary of Benefits:
- Allows the dryer to operate at peak efficiency
- Can help reduce drying times, wear and tear
- A large, accessible opening makes cleaning and maintenance a breeze
- Installs easily in lap siding, stucco, brick and other conventional sidings
- Blends into exteriors with clean lines and low profile
- Meets or exceeds manufacturer and code requirements
- Provides extra protection from weather and pests
- Stands the test of time with heavy gauge steel and powder coating
USPTO Patents 11,953,230 & 12,038,202
Videos
Technical Documentation
Ratings & Reviews
69 Reviews
Excellent
by Will| 2/10/2023 8:42 am
Excellent Product. Exactly what we needed.
Best I've Found
by RKAP| 6/9/2015 12:00:00 am
Received quickly after ordering. Solidly built, closes firmly and doesn't "flap" in heavy wind. Far better than aluminum or plastic wall vents. Will be easy to insert vacuum hose to remove lint from vent pipe. It does not make an airtight seal however, (aluminum vents with flapper don't seal either) so I don't yet know it will be in the winter. Good product, would buy again.
Best vent cover I have used
by Lorne| 6/20/2015 12:00:00 am
I had been looking for a vent cover that would last and not let birds in. This is it. I have install several of these for customers and one of my one and they have worked great.
Best vent Ever!
by Mike Chapman| 3/30/2019 12:00:00 am
Was getting tired of the "regular" exhaust fan vents degrading and falling apart, picked up a pair of these for replacements and work like a charm. No more banging when it's windy or critters getting in through broken flaps!
did not fit
by James| 4/27/2020 12:00:00 am
great product but the collar is to big to fit inside the 4" duct and to small to fit over the 4" duct pipe
Dog proof
by Marc| 8/12/2015 12:00:00 am
I purchased this product after my Great Pyrenees puppy decided to eat 3 different versions of dryer vents, from plastic to metal. The product was easy to install and is solid quality. And best of all the dog has not touched it.
Dryer box
by Bruce| 11/12/2015 12:00:00 am
Would like to say my order was shipped in a timely manner. I installed 2 of them in a short time. They solved my problems with trying to find a replacement for a J channel siding box vent.
Dryer vent
by David| 2/19/2018 12:00:00 am
Great, simple valve that works and looks good. Thanks for solving my problem, I don't have to clean the bird guard every two weeks any more!
Dryer vent
by Pat| 7/16/2015 12:00:00 am
Perfect, high quality
Dryer Vent
by Ted| 12/16/2015 12:00:00 am
Installed this dryer vent and it works like a charm. Great air pressure. When dryer shuts off the vent seals well. Great value!
Dryer Wall Vent
by David| 12/15/2015 12:00:00 am
This wall vent is very well made. I was hoping that it would not be effected by the wind but it was. I called the company and they sent me out a sound damper and extra magnets to solve the problem at no charge. We just had a windy day and the damper and magnets did the trick. Thank you very much!
Dryer wall vent
by Mike Pettit| 6/28/2021 12:00:00 am
This is the 6th time I have bought this product. Never had a problem. They look to have done a slight revision , I think it is now even better made
Dryer Wall Vent
by RB| 10/31/2015 12:00:00 am
Great product and customer service. Little more complicated that the video. Be careful when taking the old one off not to dislodge the conduit stretching to the inside connection:)
Dryer Wall Vent
by MB| 12/30/2015 12:00:00 am
This product appears to be better built then most vents I've researched. Installation was relatively easy and so far this vent has worked flawlessly. The only improvement would be a total seal around the inside edge to keep most bugs from crawling inside during extended none use.
Dryer wall vent
by Tim| 10/30/2015 12:00:00 am
Great product, great price. We installed into an outside wall and it just slipped easily (but snug enough that it stays put) into a 4" PVC pipe. I plan to clean the vent every six months and I can simply pull the vent out of the PVC, check for lint build-up, then push it right back into the PVC. Ordered the right color that matched our stone. Looks great!
Dryer Wall Vent
by Michelle| 11/5/2015 12:00:00 am
Just installed. Installation was very easy. The vent looks great. Only disappointment is that the wind can occasionally open the vent. Overall much better than the plastic louver that was there.
DryerBox Wall vent
by Ligppod| 11/26/2015 12:00:00 am
The DryerBox vent replaced a Leigh Aluminum vent that was installed when the house was built in 1968. It was mortared in during the original brick construction. The little aluminum hinges wore out. It took a little gentle work with a hammer and chisel to flatten the surface around the original tube. The DryerBox Vent tube then fit snugly in the original tube. Silicone was used to fasten the DryerBox and caulk the perimeter. It has worked flawlessly. I am very pleased with the ease of installation and the operation. It saved me from having to crawl about 60 feet in the crawl space. I was able to install it completely from outside.
Durable construction
by Jeff D.| 3/28/2018 12:00:00 am
I haven’t installed it yet but it looks like it’s a very good quality vent. This is more durable than the flimsy vents you will find at the big box retailers or other online sites. I do have some reservations on where seams are located on the vents external facing surfaces. I will have to use chalking to seal them off from water ingress, which hopefully won’t effect the low resistance flap from seating properly.
DWV4B Premium Flush-mount Metal Dryer Wall Vent
by APF3| 11/12/2015 12:00:00 am
Quality and construction are very nice as advertised. The major shortfall was that the collar on the unit did not fit over the outside of the standard exhaust duct/pipe but instead slide inside. Not a very good engineering design because now the lint has a lip that lint can build up on. I will now have to periodically inspect the assembly to ensure there is no excessive buildup of lint. Because of the good quality construction I went ahead and installed it against my better judgment. This will also test the quality of the powder coating. Hopefully in the future the engineers will redesign the collar to fit the outside diameter.
Excellent dryer vent
by Eric| 9/1/2015 12:00:00 am
I bought this vent in Dec 2014 and have had it installed since January. It works great and provides an excellent looking vent compared to the cheap plastic or metal vents from the big box stores. I installed this on a older home that did not have a dryer vent at all. It was easy to install. I like the sturdy construction. This vent faces the eastern sun on my house and takes the beating from the weather. I wanted a vent that could withstand the weather. It opens and closes just as advertised. I have an eight foot dryer vent run with two elbows and it still opens up more than enough force. It stays closed and nothing gets into the vent pipe.
Excellent product.
by Thomas| 12/25/2015 12:00:00 am
I was looking for an attractive vent that would also be discreet, and this vent is perfect for me. The metal construction and well-designed door actually add to the appearance of the outside wall, instead of standing out as a bit of utiltarian ugliness, as others I've seen would have. I am well satisfied with my purchase. Definitely worth the cost.
Excellent flap
by Dave| 9/30/2020 12:00:00 am
I bought two of these; one for my dryer vent and one for the bathroom fan. Flap assembly is of very good quality, much better than the knockoff of it available at Lowes. Drilled a 4 1/8" hole in the wall and that fit the collar perfectly. I do think it would work a little better if the collar was a little longer. I ended up attaching a short collar extension to it before screwing it into the wall. Still, that is a minor issue for the quality of the unit at this price point. Would definitely buy again.
Fantastic Product
by Narin| 6/20/2017 12:00:00 am
I purchased 4 of these to replace all of my exhaust vents. Installation is easy (a Dremel is a handy tool to have for this), and it looks great. It functions perfectly for my needs. I also bought The Defender Vent cover (8") for extra protection against squirrels and birds). Finished installation looks fantastic and they function as designed. I did have an issue with shipping (do NOT use the UPS option), but Better Venting/Dryerbox really stepped up to help out. The customer service was every bit as good as the product thus far. Extremely happy!
Flush-mount dryer vent
by Don| 7/31/2015 12:00:00 am
Very well constructed easily installed prompt delivery easily tracked all the way.We bought the scratch and dent model,was surprised it only had minor surface paint marring. Thank you Don
flush mounted vent
by Barbara| 7/17/2015 12:00:00 am
Very well made, and perfectly finished.